banner_page

MAX971EPA+

Tube 15μA mA 300000 ns μs Linear Comparators 2003 3.2μA μA 10mV mV Through Hole


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX971EPA+
  • Package: DIP
  • Datasheet: PDF
  • Stock: 528
  • Description: Tube 15μA mA 300000 ns μs Linear Comparators 2003 3.2μA μA 10mV mV Through Hole (Kg)

Details

Tags

Parameters
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 11V
Min Supply Voltage 2.5V
Nominal Supply Current 3.2μA
Output Current 15μA
Max Supply Current 3.2μA
Quiescent Current 4μA
Response Time 300000 ns
Amplifier Type COMPARATOR
Common Mode Rejection Ratio 80 dB
Input Offset Voltage (Vos) 10mV
Max Dual Supply Voltage 5.5V
Min Dual Supply Voltage 1.25V
Hysteresis 50 mV
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Package / Case DIP
Number of Pins 8
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Comparator
Max Power Dissipation 727mW
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 2.54mm
Pin Count 8
Output Type OPEN-DRAIN

MAX971EPA+ Overview


The product is packaged in DIP for ease of transportation.Output type of this comparator is OPEN-DRAIN .As a result, it is designed with Tube package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.The device contains 8 pins.There are 8 pins on the comparator.There is a quiescent current of 4μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.Electronic comparator is recommended that the nominal supply current be 3.2μA in order to use the device normally.An excess of current supply over 3.2μA could result in malfunction of the comparator.Comparator electronics is not recommended to maintain a temperature above 85°C .Comparator electronics cannot be operated at a temperature lower than -40°C .A comparator's maximum supply voltage is 11V volts.Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 2.5V .For the output to be of high quality, 1 channels must cooperate together.The comparator essentially has a COMPARATOR amplifier that has very high gain.

MAX971EPA+ Features


OPEN-DRAIN output capability
Quiescent Current: 4μA
COMPARATOR amplifier

MAX971EPA+ Applications


There are a lot of Maxim Integrated MAX971EPA+ linear comparators applications.

  • Power Supervision
  • Self-diagnostics
  • Ultra-Low Power Systems
  • Notebooks and PDAs
  • Laptop Computers
  • RC Timers
  • Set Top Boxes
  • Battery-Powered Electronics
  • Threshold Detectors
  • Factory automation & control

Write a review

Note: HTML is not translated!
    Bad           Good