MAX9728AEUD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | DirectDrive® |
| JESD-609 Code | e3 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Class AB |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.177W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9728 |
| Pin Count | 14 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3.5mA |
| Quiescent Current | 3.5mA |
| Output Power | 60mW |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Max Output Power | 60mW |
| Max Output Power x Channels @ Load | 60mW x 2 @ 32 Ω |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9728AEUD+T Overview
Amp parts is embedded in the 14-TSSOP (0.173, 4.40mm Width) package.Ideally, the chip should be packaged in a Tape & Reel (TR) case.In 14 terminations, the transmission line is terminated with an impedance-matching device.Amp parts uses Headphones, 2-Channel (Stereo) as the output.Class AB is the type of this electrical device.The 14 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .This electrical device operates at 4.5V~5.5V volts.The chip is equipped with 2 channels.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA .The device is equipped with 14 pins.Amp parts is part of Audio/Video Amplifiers .This chip is included in the MAX9728 family.Amp parts is mounted in the way of Surface Mount .A maximum output power of 60mW kWh per hour is possible for this electronic part.A normal operation is dependent upon the supply voltage (Vsup) remaining above 4.5V .Amp parts reaches 5.5V when the maximum supply voltage (Vsup) is reached.Single is the type of supply for this electronic part.Amp parts is powered by a 5V volt power supply.Amp parts is a part of the DirectDrive? series.Despite being unaffected by external factors, it consumes 3.5mA of quiescent current.
MAX9728AEUD+T Features
14-TSSOP (0.173, 4.40mm Width) package
14 pin count
MAX9728 family
60mW kWh per hour
DirectDrive? series
MAX9728AEUD+T Applications
There are a lot of Maxim Integrated MAX9728AEUD+T audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Communication device
- ECG equipment
- Integrator and differentiator circuits
- Power control
- High/low-pass filter circuit
- Oscilloscopes
- Signal operation
- Active probe
- Displayers for aircraft and air transportation control systems
