MAX9728BETC+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | DirectDrive® |
| JESD-609 Code | e3 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.177W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9728 |
| Pin Count | 12 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3.5mA |
| Quiescent Current | 3.5mA |
| Output Power | 60mW |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 3.52dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Max Output Power | 60mW |
| Max Output Power x Channels @ Load | 60mW x 2 @ 32 Ω |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9728BETC+T Overview
I have embedded this device in 12-WFQFN Exposed Pad .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In 12 terminations, a transmission line is terminated with a device that matches its characteristic impedance.Amp parts is configured wAmp partsh an output of Headphones, 2-Channel (Stereo) .An electrical device of type Class AB is involved.The 12 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Amp parts is mounted in front of Surface Mount .In this electrical device, the supply voltage is 4.5V~5.5V .2 channels are present on the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA .The device is equipped with 12 pins.This part is included in Audio/Video Amplifiers .Amp parts is a member of the family MAX9728 .In this case, the electronic part is mounted in the way of Surface Mount .In this electronic part, the output power is a maximum of 60mW kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 4.5V to ensure proper operation of the device.Upon reaching 5.5V , the maximum supply voltage (Vsup) is reached.There is a supply type of Single for this electronic part.The system is powered by a 5V battery.Amp parts belongs to the series DirectDrive? .The device consumes 3.5mA quiescent current and is unaffected by external influences.
MAX9728BETC+T Features
12-WFQFN Exposed Pad package
12 pin count
MAX9728 family
60mW kWh per hour
DirectDrive? series
MAX9728BETC+T Applications
There are a lot of Maxim Integrated MAX9728BETC+T audio amplifiers applications.
- Integrator and differentiator circuits
- Automation control systems
- Information processing
- Medical imaging
- Broadcasting
- Video and image computer boards
- Biopotential
- High input resistance broadband
- Test equipment
- Logarithmic and exponential operation circuits
