banner_page

MAX972ESA

Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 2003 4.5μA μA 10mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX972ESA
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 825
  • Description: Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 2003 4.5μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Current - Output (Typ) 0.015mA @ 5V
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2003
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Max Power Dissipation 471mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 2
Supply Voltage 3V
Base Part Number MAX972
Pin Count 8
Output Type Open Drain
Number of Elements 2
Nominal Supply Current 4.5μA
Output Current 15μA
Max Supply Current 4.5μA
Quiescent Current 4μA
Response Time 12 μs
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Voltage - Input Offset (Max) 10mV @ 5V
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR

MAX972ESA Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.We ship the part through Tube .8 terminals are found on the comparator.The chip belongs to Comparator .In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 2 elements.Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 8 pins.Alternatively, you may search for MAX972 to find more pin-to-pin solutions for your specific needs.There is 4μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 4.5μA .Current supply exceeding 4.5μA could cause disfunction of the compartator.

MAX972ESA Features


Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4μA

MAX972ESA Applications


There are a lot of Maxim Integrated MAX972ESA linear comparators applications.

  • Zero-Crossing Detectors
  • High-Speed Differential Line Receiver
  • Portable and Battery-Powered Systems
  • Laptop Computers
  • Pulse, Squarewave, and Time Delay Generators
  • Battery-Powered Electronics
  • Consumer Medical Electronics
  • System control and monitoring
  • Analog front end
  • Automatic Test Equipment

Write a review

Note: HTML is not translated!
    Bad           Good