MAX9730ETI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Class G |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX9730 |
| Pin Count | 28 |
| Output Type | 1-Channel (Mono) |
| Max Output Current | 800mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 8mA |
| Quiescent Current | 8mA |
| Output Power | 2.4W |
| Common Mode Rejection Ratio | 68 dB |
| Bandwidth | 22 kHz |
| Voltage Gain | 12dB |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Max Output Power | 2.4W |
| Max Output Power x Channels @ Load | 2.4W x 1 @ 8 Ω |
| Load Impedance | 8Ohm |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9730ETI+T Overview
The package 28-WFQFN Exposed Pad contains it.The chip is recommended to be packaged in Tape & Reel (TR) case. Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 28 termination.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.This electrical device has the type Class G .Computers and other communication devices feature 28 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .There is 2.7V~5.5V voltage supply to this electrical device.This device is equipped with a total of 1 channels.During operation, Depop, Differential Inputs, Shutdown can be ensured.There should be no temperature increase above -40°C~85°C TA .There are 28 pins on this device.There is a part belonging to Audio/Video Amplifiers .The MAX9730 family contains this object.There is an electronic component mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 2.4W kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.7V .5.5V is the maximum supply voltage (Vsup).The power supply is 3.6V .Its consumption of quiescent current is 8mA .A maximum output current of 800mA ensures maximum flexibility in the design of the device.
MAX9730ETI+T Features
28-WFQFN Exposed Pad package
28 pin count
MAX9730 family
2.4W kWh per hour
MAX9730ETI+T Applications
There are a lot of Maxim Integrated MAX9730ETI+T audio amplifiers applications.
- Vehicle electronics
- Fast A/D and D/A converters, video amplifiers
- Broadcasting
- Radar
- Addition and subtraction operation circuits
- Logarithmic and exponential operation circuits
- Biopotential
- Industrial control system
- Semiconductor detectors
- Signal filtering
