banner_page

MAX974CSE+

Surface Mount Tube 15μA mA 300000 ns μs Linear Comparators 2003 8.5μA μA 10mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX974CSE+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 725
  • Description: Surface Mount Tube 15μA mA 300000 ns μs Linear Comparators 2003 8.5μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Terminal Pitch 1.27mm
Base Part Number MAX974
Pin Count 16
Output Type Open Drain
Number of Elements 4
Power Supplies +-1.25/+-5.5/2.5/11V
Nominal Supply Current 8.5μA
Output Current 15μA
Max Supply Current 8.5μA
Quiescent Current 8.5μA
Response Time 300000 ns
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Supply Voltage Limit-Max 12V
Voltage - Input Offset (Max) 10mV @ 5V
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 0.015mA @ 5V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type with Voltage Reference
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 696mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3V

MAX974CSE+ Overview


For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Open Drain .Electronic comparator is shipped by Tube .You can find 16 terminals of the comparator.Electronic comparator is a part of Comparator family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.Currently, it consists of only 4 elements.Electronic comparator has 16 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator has 16 pins.You may wish to search MAX974 for more solutions that address your specific needs.A quiescent current of 8.5μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 8.5μA .Current supply exceeding 8.5μA could cause disfunction of the compartator.In order to operate the device, +-1.25/+-5.5/2.5/11V power supplies are sufficient.

MAX974CSE+ Features


Open Drain output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 8.5μA

MAX974CSE+ Applications


There are a lot of Maxim Integrated MAX974CSE+ linear comparators applications.

  • Hand-Held Electronics
  • Security Detection Systems
  • Current and voltage sensing
  • Notebooks and PDAs
  • Mobile Communications
  • Window Comparators, Multivibrators
  • Laptop Computers
  • Threshold Detectors
  • Power Supervision
  • RC Timers

Write a review

Note: HTML is not translated!
    Bad           Good