MAX975ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX975 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 820 ns |
| Quiescent Current | 500μA |
| Max Output Voltage | 2mV |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 100nA |
| Input Bias Current | -300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5.25V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 90dB CMRR, 90dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX975ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with a CMOS, Rail-to-Rail, TTL output is used here.We ship the part through Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as General Purpose .In total, it contains 1 elements.A total of 8 pins are included.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX975 .The comparator presents a quiescent current of 500μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 500μA .A current supply greater than 500μA may result in the comparator malfunctioning.A maximum current of 100nA can be supplied to the device.A normal operation requires a voltage of 5V .
MAX975ESA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX975ESA+ Applications
There are a lot of Maxim Integrated MAX975ESA+ linear comparators applications.
- High-Speed Differential Line Receiver
- Mobile Communications
- Appliances
- Infotainment and Clusters
- Factory automation & control
- Point of load regulators
- Building automation
- Automatic Test Equipment
- Wide Range VCO; MOS Clock Timers
- Threshold Detectors
