Parameters |
Common Mode Rejection Ratio |
90 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.25V |
Input Offset Voltage (Vos) |
2mV |
Average Bias Current-Max (IIB) |
0.4μA |
Power Supply Rejection Ratio (PSRR) |
90dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
100nA |
Voltage - Input Offset (Max) |
2mV @ 5V |
Current - Input Bias (Max) |
0.1μA @ 5.25V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
82dB CMRR, 90dB PSRR |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5.25V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX975 |
Pin Count |
8 |
Output Type |
CMOS, Rail-to-Rail, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Nominal Supply Current |
500μA |
Max Supply Current |
500μA |
Propagation Delay |
820 ns |
Quiescent Current |
500μA |
Turn On Delay Time |
28 ns |
Response Time |
28 ns |
MAX975EUA+ Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.The chip is packaged with Tube .The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.With a 5.25V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .This is a 1 element comparator.The board includes 8 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 8 .In order to find a solution that meets your specific needs, search MAX975 for more pin-to-pin solutions.A quiescent current of 500μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 500μA supply current.A current supply greater than 500μA may result in the comparator malfunctioning.Comparator electronics is necessary to have a voltage of 5V for normal operation.
MAX975EUA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX975EUA+ Applications
There are a lot of Maxim Integrated MAX975EUA+ linear comparators applications.
- Set Top Boxes
- Handheld Instruments
- High-Speed Sampling Circuits
- Appliances
- Self-diagnostics
- Limit Comparators
- General-Purpose, Low-Voltage Applications
- Metering Systems
- Power management
- Analog front end