MAX975EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX975 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 28 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 28 ns |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | -300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5.25V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 82dB CMRR, 90dB PSRR |
| Propagation Delay (Max) | 820ns |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX975EUA+T Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Rail-to-Rail, TTL output is used here.This chip is designed with the Tape & Reel (TR) package.The device is designed with 8 terminations.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.In total, it contains 1 elements.The device contains 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.Alternatively, you may search for MAX975 to find more pin-to-pin solutions for your specific needs.A quiescent current of 500μA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.
MAX975EUA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX975EUA+T Applications
There are a lot of Maxim Integrated MAX975EUA+T linear comparators applications.
- Power Supervision
- Mobile Phones and Tablets
- Ultra-Low Power Systems
- Portable Battery Monitoring
- Automatic Test Equipment
- Point of load regulators
- RC Timers
- Set Top Boxes
- Consumer Medical Electronics
- Battery management and protection
