MAX9768ETG+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.22W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9768 |
| Pin Count | 24 |
| Output Type | 1-Channel (Mono) |
| Max Output Current | 2.2A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 7mA |
| Output Power | 10W |
| Supply Type | Dual |
| Gain Bandwidth Product | 1.8MHz |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Max Output Power | 10W |
| Dual Supply Voltage | 12V |
| Max Output Power x Channels @ Load | 10W x 1 @ 8 Ω |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Depop, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
MAX9768ETG+ Overview
There is a device embedded in 24-WFQFN Exposed Pad .The chip is recommended to be packaged in Tube case. Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .Class D is the type of this electrical device.As part of the signal interface in a computer or other communication device, there are 24 pins.The chip is mounted by Surface Mount .There is 4.5V~14V voltage supply to this electrical device.1 channels are provided by the device.When operating, it is possible to ensure Depop, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control .During operation, the temperature should not exceed -40°C~85°C TA .The device contains 24 pins.Audio/Video Amplifiers contains it.Amp parts belongs to MAX9768 family.This electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 10W kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.7V .The maximum supply voltage (Vsup) is reached at 3.6V .Supply type Dual is assigned to this electronic part.As a result of its maximum output current of 2.2A , it is highly flexible in terms of design.There is 1 amplifier, which is an electronic device that increases voltage, current, or power.
MAX9768ETG+ Features
24-WFQFN Exposed Pad package
24 pin count
MAX9768 family
10W kWh per hour
MAX9768ETG+ Applications
There are a lot of Maxim Integrated MAX9768ETG+ audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Power transmission
- Medical imaging
- Computer workstations and wireless base stations
- Fission chambers
- Active probe
- Signal filtering
- Inverse/same-phase proportional circuit
- Biopotential
- High/low-pass filter circuit
