banner_page

MAX976ESA+T

Surface Mount Tape & Reel (TR) 28 ns μs Linear Comparators 75nA pA 2012 2mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX976ESA+T
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 535
  • Description: Surface Mount Tape & Reel (TR) 28 ns μs Linear Comparators 75nA pA 2012 2mV mV Surface Mount (Kg)

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Base Part Number MAX976
Pin Count 8
Output Type CMOS, Rail-to-Rail, TTL
Number of Elements 2
Power Supplies 3/5V
Propagation Delay 28 ns
Quiescent Current 650μA
Supply Current-Max 1.3mA
Response Time 28 ns
Common Mode Rejection Ratio 100 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 2mV
Average Bias Current-Max (IIB) 0.3μA
Input Bias Current 75nA
Current - Quiescent (Max) 650μA
Voltage - Input Offset (Max) 2mV @ 5V
Current - Input Bias (Max) 0.075μA @ 5.5V
Hysteresis 4mV
CMRR, PSRR (Typ) 95dB CMRR, 100dB PSRR
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e3
Pbfree Code yes

MAX976ESA+T Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Rail-to-Rail, TTL .The part is shipped by Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component here belongs to the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 8 .You can search MAX976 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 650μA .The PCB or other board has a Surface Mount for mounting.The device can be operated with 3/5V power supplies.The part can be powered at a minimum current of 1.3mA .

MAX976ESA+T Features


CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 650μA

MAX976ESA+T Applications


There are a lot of Maxim Integrated MAX976ESA+T linear comparators applications.

  • Battery-Powered Electronics
  • Zero-Crossing Detectors
  • Security Detection Systems
  • Simple Analog-to-Digital Converters (ADCs)
  • Battery-Powered Electronics
  • High-Speed Differential Line Receiver
  • Limit Comparators
  • Notebooks and PDAs
  • Zero-Crossing Detectors
  • Automotive

Write a review

Note: HTML is not translated!
    Bad           Good