MAX976EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX976 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Propagation Delay | 28 ns |
| Quiescent Current | 650μA |
| Supply Current-Max | 1.3mA |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Input Bias Current | 75nA |
| Current - Quiescent (Max) | 650μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.075μA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 95dB CMRR, 100dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX976EUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Rail-to-Rail, TTL .The part will be shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The chip belongs to Comparators .The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Speaking of types, this is a typical General Purpose comparator.In total, it contains 2 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search MAX976 for more pin-to-pin solutions.This comparator presents a quiescent current of 650μA .The board has a Surface Mount for mounting on a PCB or any other board.In order to run the device, there are only 3/5V power supplies required.With a minimum current of 1.3mA , this part can be supplied.
MAX976EUA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 650μA
MAX976EUA+T Applications
There are a lot of Maxim Integrated MAX976EUA+T linear comparators applications.
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- System control and monitoring
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Window Comparators
- Automatic Test Equipment
- Building automation
- Body Control Modules
- Automotive
