MAX977EEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX977 |
| Pin Count | 16 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 820 ns |
| Quiescent Current | 500μA |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 100nA |
| Current - Quiescent (Max) | 500μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5.25V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 82dB CMRR, 90dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX977EEE Overview
Electronic comparator is packaged in 16-SSOP (0.154, 3.90mm Width) for convenient transportation.There is a CMOS, Rail-to-Rail, TTL output type for this comparator.This chip is designed with the Tube package.16 terminals are found on the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 2 .There are 16 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 16 pins.Try search MAX977 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 500μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires 1mA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .A power supply of 3/5V is sufficient for the operation of the device.
MAX977EEE Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX977EEE Applications
There are a lot of Maxim Integrated MAX977EEE linear comparators applications.
- Notebooks and PDAs
- High-Speed Differential Line Receiver
- Motor drives
- Alarm and Monitoring Circuits
- Factory automation & control
- Handheld Instruments
- Battery-Powered Electronics
- Portable and Battery-Powered Systems
- Window Comparators
- Infotainment and Clusters
