MAX977ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5.25V |
| Base Part Number | MAX977 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 820 ns |
| Quiescent Current | 500μA |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 100nA |
| Current - Quiescent (Max) | 500μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5.25V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 90dB CMRR, 90dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX977ESD+T Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type CMOS, Rail-to-Rail, TTL output on this device.Ready for shipping in Tape & Reel (TR) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5.25V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator consists of 2 elements in total.The device is equipped with 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.You can find more pin-to-pin solutions by searching MAX977 .In this comparator, the quiescent current is 500μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 1mA .Current supply exceeding 1mA could cause disfunction of the compartator.The device can be operated with 3/5V power supplies.
MAX977ESD+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX977ESD+T Applications
There are a lot of Maxim Integrated MAX977ESD+T linear comparators applications.
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Building automation
- Window Comparators
- Portable Battery Monitoring
- Mobile Communications
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators, Multivibrators
- Analog front end
- Handheld Instruments
