Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2014 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
696mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX978 |
Pin Count |
16 |
Output Type |
CMOS, Rail-to-Rail, TTL |
Power Supplies |
3/5V |
Number of Circuits |
4 |
Nominal Supply Current |
120μA |
Max Supply Current |
120μA |
Propagation Delay |
28 ns |
Quiescent Current |
650μA |
Response Time |
28 ns |
Common Mode Rejection Ratio |
100 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
2mV |
Average Bias Current-Max (IIB) |
0.3μA |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
75nA |
Voltage - Input Offset (Max) |
2mV @ 5V |
Current - Input Bias (Max) |
0.075μA @ 5.5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
95dB CMRR, 100dB PSRR |
Propagation Delay (Max) |
28ns |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX978ESE+ Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a CMOS, Rail-to-Rail, TTL output type for this comparator.We ship the part through Tube .There are 16 terminals on the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .The device is equipped with 16 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 16 pins.You can find more pin-to-pin solutions by searching MAX978 .There is a quiescent current of 650μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 120μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 120μA .There is sufficient power to run the device from 3/5V power supplies.
MAX978ESE+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 650μA
MAX978ESE+ Applications
There are a lot of Maxim Integrated MAX978ESE+ linear comparators applications.
- Building automation
- RC Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Portable and Battery-Powered Systems
- Automotive
- Alarm and Monitoring Circuits
- Appliances
- Zero-Crossing Detectors
- Handheld Instruments