Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Output Type |
OPEN-DRAIN |
Temperature Grade |
COMMERCIAL |
Number of Channels |
1 |
Max Supply Voltage |
11V |
Min Supply Voltage |
2.5V |
Nominal Supply Current |
3μA |
Output Current |
15μA |
Max Supply Current |
3μA |
Propagation Delay |
12 μs |
Quiescent Current |
4μA |
Response Time |
300000 ns |
Amplifier Type |
COMPARATOR |
Common Mode Rejection Ratio |
80 dB |
Input Offset Voltage (Vos) |
10mV |
Max Dual Supply Voltage |
5.5V |
Min Dual Supply Voltage |
1.25V |
Hysteresis |
50 mV |
Height Seated (Max) |
4.572mm |
Length |
9.375mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX981CPA+ Overview
To facilitate transportation, it comes packaged in PDIP .A comparator with an output type of OPEN-DRAIN is being used.As a result, it is designed with Tube package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.A total of 8 pins are included.The comparator has a pin count of 8 .This comparator presents a quiescent current of 4μA .There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 3μA when using the device.A supply current exceeding 3μA may result in the comparator malfunctioning.Temperature higher than 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .Compatibility is defined as 11V when the comparator is operating at its maximum supply voltage.A voltage of 2.5V is the minimum supply voltage allowed by this comparator.To ensure a high level of output quality, 1 channels work together.There is a high gain COMPARATOR amplifier at the heart of the comparator.
MAX981CPA+ Features
OPEN-DRAIN output capability
Quiescent Current: 4μA
COMPARATOR amplifier
MAX981CPA+ Applications
There are a lot of Maxim Integrated MAX981CPA+ linear comparators applications.
- Window Comparators
- Building automation
- Power management
- Mobile Phones and Tablets
- Battery-Powered Electronics
- Current and voltage sensing
- Appliances
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits