MAX981EPA+
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX981 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 2.5μA |
| Output Current | 15μA |
| Max Supply Current | 2.5μA |
| Quiescent Current | 4μA |
| Response Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX981EPA+ Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .There is a Open Drain output type for this comparator.The part is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical with Voltage Reference comparator.There are a total of 1 elements in it.The device contains 8 pins.Through Hole universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.This comparator has 8 pins.You may wish to search MAX981 for more solutions that address your specific needs.A quiescent current of 4μA is observed in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2.5μA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2.5μA .
MAX981EPA+ Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4μA
MAX981EPA+ Applications
There are a lot of Maxim Integrated MAX981EPA+ linear comparators applications.
- Industrial
- Battery-Powered Electronics
- Lithium ion battery monitoring
- Handheld Instruments
- Portable and Battery-Powered Systems
- Notebooks and PDAs
- Limit Comparators
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Motor drives
