MAX98300ETA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class D |
| Max Power Dissipation | 953.5mW |
| Technology | CMOS |
| Voltage - Supply | 2.6V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX98300 |
| Output Type | 1-Channel (Mono) |
| Max Output Current | 600mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.6V |
| Number of Channels | 1 |
| Nominal Supply Current | 2mA |
| Output Power | 2.6W |
| Common Mode Rejection Ratio | 50 dB |
| Bandwidth | 22 kHz |
| Voltage Gain | 12dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 2.6W |
| Max Output Power x Channels @ Load | 2.6W x 1 @ 4 Ω |
| Load Impedance | 4Ohm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX98300ETA+T Overview
This package is embedded in 8-WFDFN Exposed Pad .Chips should be packaged in Tape & Reel (TR) cases.8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.The output it is configured with uses 1-Channel (Mono) .There is Class D type of electrical device associated with this device.As part of a signal interface in a computer or other communication device, there are 8 pins, which are pronged contacts.The chip is mounted by Surface Mount .There is 2.6V~5.5V voltage supply to this electrical device.There are no channels on the device.Amp parts is possible to guarantee Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown when operating.A temperature greater than -40°C~85°C TA should not be used.Amp parts is a member of the family MAX98300 .Amp parts is mounted in the way of Surface Mount .In this electronic part, the output power is a maximum of 2.6W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.6V to ensure proper operation of the device.During this time, the maximum supply voltage (Vsup) reaches 5.5V .As a result of the maximal output current of 600mA , the device offers maximum design flexibility.
MAX98300ETA+T Features
8-WFDFN Exposed Pad package
MAX98300 family
2.6W kWh per hour
MAX98300ETA+T Applications
There are a lot of Maxim Integrated MAX98300ETA+T audio amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Communication
- Automotive sensors
- Logarithmic and exponential operation circuits
- ECG equipment
- High input resistance broadband
- Inverse/same-phase proportional circuit
- Communication device
- Precision measurement
- Vehicle electronics
