banner_page

MAX983CSA+

Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 1997 6μA μA 10mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX983CSA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 210
  • Description: Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 1997 6μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 1997
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Voltage Reference
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Max Power Dissipation 471mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Base Part Number MAX983
Pin Count 8
Output Type Open Drain
Number of Elements 2
Nominal Supply Current 6μA
Output Current 15μA
Max Supply Current 6μA
Quiescent Current 6μA
Response Time 12 μs
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Voltage - Input Offset (Max) 10mV @ 5V
Hysteresis 50mV
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 0.015mA @ 5V
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX983CSA+ Overview


For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Open Drain output is used here.Ready for shipping in Tube package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.It's a typical with Voltage Reference comparator.Electronic comparator has a total of 2 elements.The device contains 8 pins.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions by searching MAX983 .There is a quiescent current of 6μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 6μA .A supply current exceeding 6μA may result in the comparator malfunctioning.

MAX983CSA+ Features


Open Drain output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 6μA

MAX983CSA+ Applications


There are a lot of Maxim Integrated MAX983CSA+ linear comparators applications.

  • Limit Comparators
  • Body Control Modules
  • General-Purpose, Low-Voltage Applications
  • Mobile Communications
  • Power Supervision
  • Battery-Powered Electronics
  • System control and monitoring
  • Hand-Held Electronics
  • Threshold Detectors
  • Window Comparators

Write a review

Note: HTML is not translated!
    Bad           Good