banner_page

MAX983ESA+

Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 1996 6μA μA 10mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX983ESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 281
  • Description: Surface Mount Tube 15μA mA 12 μs μs Linear Comparators 1996 6μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 1996
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Voltage Reference
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Max Power Dissipation 471mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Base Part Number MAX983
Pin Count 8
Output Type Open Drain
Number of Elements 2
Nominal Supply Current 6μA
Output Current 15μA
Max Supply Current 6μA
Quiescent Current 6μA
Response Time 12 μs
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Voltage - Input Offset (Max) 10mV @ 5V
Hysteresis 50mV
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 0.015mA @ 5V
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX983ESA+ Overview


For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Open Drain output is used here.Electronic comparator is shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparators .A comparator supplied with 3V voltage can complete many demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.The total number of elements is 2 .The device contains 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.Try search MAX983 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 6μA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 6μA for normal use.A current supply greater than 6μA may result in the comparator malfunctioning.

MAX983ESA+ Features


Open Drain output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA

MAX983ESA+ Applications


There are a lot of Maxim Integrated MAX983ESA+ linear comparators applications.

  • High-Speed Differential Line Receiver
  • Window Comparators, Multivibrators
  • Mobile Communications
  • Power Supervision
  • Battery-Powered Electronics
  • Alarm and Monitoring Circuits
  • General-Purpose, Low-Voltage Applications
  • Hand-Held Electronics
  • Appliances
  • Battery-Powered Electronics

Write a review

Note: HTML is not translated!
    Bad           Good