MAX984EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | MAX984 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Output Type | Open Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-5.5/2.5/11V |
| Nominal Supply Current | 6.6μA |
| Output Current | 15μA |
| Max Supply Current | 6.6μA |
| Quiescent Current | 8.5μA |
| Response Time | 300000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 12V |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height Seated (Max) | 5.72mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX984EPE+ Overview
In order to facilitate transportation, it is packaged in 16-DIP (0.300, 7.62mm) .The comparator has a type Open Drain output.Electronic comparator is shipped by Tube .The device is designed with 16 terminations.The component belongs to the Comparator family of electrical components.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as with Voltage Reference .Currently, it consists of only 4 elements.The device contains 16 pins.The recommended mounting type is Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.If you require more pin-to-pin solutions, search MAX984 for more options.In this comparator, the quiescent current is 8.5μA .There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 6.6μA .A current supply greater than 6.6μA may cause the comparator to malfunction.There is sufficient power to run the device from +-1.25/+-5.5/2.5/11V power supplies.
MAX984EPE+ Features
Open Drain output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 8.5μA
MAX984EPE+ Applications
There are a lot of Maxim Integrated MAX984EPE+ linear comparators applications.
- Zero-Crossing Detectors
- Point of load regulators
- Zero-Crossing Detectors
- System control and monitoring
- Window Comparators
- Motor drives
- Hand-Held Electronics
- Laptop Computers
- Body Control Modules
- Notebooks and PDAs
