MAX9850ETI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | DirectDrive® |
| JESD-609 Code | e3 |
| Feature | DAC, Depop, Digital Inputs, I2C, I2S, Line Level Inputs and Outputs, Mute, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.857W |
| Technology | BICMOS |
| Voltage - Supply | 1.8V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 48kHz |
| Base Part Number | MAX9850 |
| Pin Count | 28 |
| Number of Outputs | 2 |
| Output Voltage | 1.95V |
| Output Type | Headphones, 2-Channel (Stereo) |
| Polarity | Unipolar |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, Serial |
| Operating Supply Current | 7.6mA |
| Nominal Supply Current | 5.9mA |
| Number of Bits | 18 |
| Output Power | 95mW |
| Resolution | 2.25 B |
| Sampling Rate | 48 ksps |
| Settling Time | 600 ns |
| Max Output Power | 95mW |
| Conversion Rate | 48 ksps |
| Signal to Noise Ratio (SNR) | 91 dB |
| Number of D/A Converters | 1 |
| Max Output Power x Channels @ Load | 95mW x 2 @ 16 Ω |
| Height | 730μm |
| Length | 5.1mm |
| Width | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9850ETI+ Overview
In the 28-WFQFN Exposed Pad package, it is embedded.Amp parts is packaged in the way of Tray .The 28 termination refers to terminating transmission lines with devices that match their characteristic impedance.Output Headphones, 2-Channel (Stereo) is configured for this device.There is Class AB type of electrical device associated with this device.In a computer or other communications device, 28 pins are pronged contacts.The electronic component is mounted in the way of Surface Mount .There is 1.8V~3.6V supply voltage for this electrical device.Operation can be ensured by DAC, Depop, Digital Inputs, I2C, I2S, Line Level Inputs and Outputs, Mute, Shutdown, Volume Control .A temperature greater than -40°C~85°C TA should not be used.The number of pins is 28 .Amp parts is part of Audio/Video Amplifiers .This chip is included in the MAX9850 family.There is an electronic component mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 95mW kWh per hour.Amp parts reaches 3.6V when the maximum supply voltage (Vsup) is reached.Amp parts is a part of the DirectDrive? series.There are 18 bits in its design.Outputs are configured to be 2 .Amplifier parts supplier operates at 48kHz Hz.There are 1 D/A converters, which convert digital signals into analog format, and A/D converter converts analog into digital.
MAX9850ETI+ Features
28-WFQFN Exposed Pad package
28 pin count
MAX9850 family
95mW kWh per hour
DirectDrive? series
18 Bits
2 outputs
the frequency of 48kHz
MAX9850ETI+ Applications
There are a lot of Maxim Integrated MAX9850ETI+ audio amplifiers applications.
- Band-pass filter
- High speed sample
- Video conversion and routing
- Multiplication and division circuits
- Fission chambers
- Test equipment
- ECG equipment
- Power control
- Computer workstations and wireless base stations
- Communication device
