MAX9850ETI+T
| Parameters | |
|---|---|
| Voltage - Supply | 1.8V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9850 |
| Pin Count | 28 |
| Output Voltage | 2.05V |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Number of Channels | 2 |
| Interface | I2C |
| Operating Supply Current | 2.9mA |
| Number of Bits | 18 |
| Resolution | 2.25 B |
| Max Frequency | 48kHz |
| Max Output Power | 95mW |
| Signal to Noise Ratio (SNR) | 88 dB |
| Max Output Power x Channels @ Load | 95mW x 2 @ 16 Ω |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | DirectDrive® |
| JESD-609 Code | e3 |
| Feature | DAC, Depop, Digital Inputs, I2C, I2S, Line Level Inputs and Outputs, Mute, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.857W |
| Technology | BICMOS |
MAX9850ETI+T Overview
The package 28-WFQFN Exposed Pad contains it.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 28 termination.Currently, amp parts is configured wAmp partsh Headphones, 2-Channel (Stereo) as the output.The device is of type Class AB .The 28 pins are pronged contacts which are part of a signal interface in a computer or other communication device.In this case, the electronic part is mounted in the way of Surface Mount .This electrical device has a 1.8V~3.6V supply voltage.Channels 2 are present in the device.Amp parts is possible to operate wAmp partsh DAC, Depop, Digital Inputs, I2C, I2S, Line Level Inputs and Outputs, Mute, Shutdown, Volume Control .Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .This device has 28 pins.The item belongs to Audio/Video Amplifiers .The MAX9850 family includes it.There is an electronic component mounted in the way of Surface Mount .This electronic part has a maximum output power of 95mW kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 1.8V to ensure proper operation of the device.Amp parts is a part of the DirectDrive? series.Amplifier parts supplier is designed wAmplifier parts supplierh 18 BAmplifier parts suppliers.
MAX9850ETI+T Features
28-WFQFN Exposed Pad package
28 pin count
MAX9850 family
95mW kWh per hour
DirectDrive? series
18 Bits
MAX9850ETI+T Applications
There are a lot of Maxim Integrated MAX9850ETI+T audio amplifiers applications.
- Power transmission
- Vehicle electronics
- Broadcasting
- High-frequency data acquisition systems
- Integrator and differentiator circuits
- Band-pass filter
- Multiplication and division circuits
- Video conversion and routing
- Inverse/same-phase proportional circuit
- Instrumentation
