MAX985ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX985 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX985ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 1 elements.The board includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.Try search MAX985 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 24μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 20μA .A supply current exceeding 20μA may result in the comparator malfunctioning.
MAX985ESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX985ESA+T Applications
There are a lot of Maxim Integrated MAX985ESA+T linear comparators applications.
- Factory automation & control
- Mobile Phones
- Consumer Medical Electronics
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- Window Comparators, Multivibrators
- Metering Systems
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- High-Speed Sampling Circuits
