MAX985EUK+T
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX985 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
MAX985EUK+T Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.Ready for shipping in Tape & Reel (TR) package.The device is designed with 5 terminations.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.A total of 5 pins are included.The recommended mounting type is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 5 pins.You can find more pin-to-pin solutions by searching MAX985 .As a result, this comparator displays a quiescent current of 24μA .There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 20μA .Current supply exceeding 20μA could cause disfunction of the compartator.You can input a maximum current of 1pA into this device.
MAX985EUK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX985EUK+T Applications
There are a lot of Maxim Integrated MAX985EUK+T linear comparators applications.
- Ultra-Low Power Systems
- Building automation
- Wearable Devices
- Security Detection Systems
- General Purpose Low Voltage Applications
- Automatic Test Equipment
- Alarm and Monitoring Circuits
- Wireless Base Stations
- Handheld Instruments
- Body Control Modules
