MAX986ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX986 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX986ESA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Open-Drain, Rail-to-Rail, TTL output on this device.The part is shipped by Tube .The comparator has a total of 8 terminals.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has 8 pins.If you require more pin-to-pin solutions, search MAX986 for more options.There is 24μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 20μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .
MAX986ESA+ Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX986ESA+ Applications
There are a lot of Maxim Integrated MAX986ESA+ linear comparators applications.
- Mobile Phones and Tablets
- Consumer Medical Electronics
- Battery management and protection
- Ultra-Low Power Systems
- Hand-Held Electronics
- Alarm and Monitoring Circuits
- Lithium ion battery monitoring
- Infotainment & cluster
- Metering Systems
- Industrial
