MAX986EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX986 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX986EUK+T Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.We ship the part through Tape & Reel (TR) .There are5 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 1 elements.The board includes 5 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 5 .If you require more pin-to-pin solutions, search MAX986 for more options.This comparator presents a quiescent current of 24μA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 20μA when using the device.If the current supply exceeds 20μA , the comparator might be damaged.Electronic comparator is possible to input a maximum of 1pA current into the device.
MAX986EUK+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX986EUK+T Applications
There are a lot of Maxim Integrated MAX986EUK+T linear comparators applications.
- RC Timers
- Laptop Computers
- Zero-Crossing Detectors
- Security Detection Systems
- Metering Systems
- Pulse, Squarewave, and Time Delay Generators
- Portable Battery Monitoring
- Notebooks and PDAs
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
