MAX987ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | MAX987 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX987ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.This package has been designed with Tube .You can find 8 terminals of the comparator.The chip belongs to Comparator .Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .This is a 1 element comparator.The device is equipped with 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search MAX987 for more pin-to-pin solutions.This comparator presents a quiescent current of 96μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 80μA .Current supply exceeding 80μA could cause disfunction of the compartator.You can input a maximum current of 1pA into this device.
MAX987ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX987ESA+ Applications
There are a lot of Maxim Integrated MAX987ESA+ linear comparators applications.
- Metering Systems
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Alarm and Monitoring Circuits
- Security Detection Systems
- Limit Comparators
- Analog front end
- Mobile Communications
- Battery-Powered Electronics
- Battery-Powered Electronics
