MAX988ESA+
| Parameters | |
|---|---|
| Max Supply Current | 80μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | MAX988 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 80μA |
MAX988ESA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Open Drain output.The chip is packaged with Tube .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 1 elements.As a result, it contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .8 pins are available on the comparator.In order to find a solution that meets your specific needs, search MAX988 for more pin-to-pin solutions.A quiescent current of 96μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 80μA for normal use.The compartator could be damaged if the current supply exceeds 80μA .
MAX988ESA+ Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX988ESA+ Applications
There are a lot of Maxim Integrated MAX988ESA+ linear comparators applications.
- Set Top Boxes
- High-Speed Sampling Circuits
- Mobile Phones
- Wide Range VCO; MOS Clock Timers
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Current and voltage sensing
- Building automation
- Zero-Crossing Detectors
- Power management
