MAX988EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | MAX988 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX988EUK+T Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail, TTL .We ship the part through Tape & Reel (TR) .There are5 terminals on the comparator.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.Electronic comparator has 5 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 5 .In case you are looking for more pin-to-pin solutions, you may want to search MAX988 .This comparator presents a quiescent current of 96μA .A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 80μA .You are allowed to input a maximum current of 1pA into the device.
MAX988EUK+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX988EUK+T Applications
There are a lot of Maxim Integrated MAX988EUK+T linear comparators applications.
- Battery-Powered Electronics
- Infotainment and Clusters
- Body Control Modules
- High-Speed Differential Line Receiver
- Handheld Instruments
- Battery-Powered Electronics
- Metering Systems
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Limit Comparators
