MAX989ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX989 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 300 ns |
| Quiescent Current | 24μA |
| Turn On Delay Time | 300 ns |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX989ESA+ Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.The part is shipped by Tube .The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator includes 8 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX989 .As a result, this comparator displays a quiescent current of 24μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 20μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .
MAX989ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX989ESA+ Applications
There are a lot of Maxim Integrated MAX989ESA+ linear comparators applications.
- Mobile Phones
- Current and voltage sensing
- Limit Comparators
- Consumer Medical Electronics
- Point of load regulators
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Automotive
- Motor drives
- Hand-Held Electronics
