MAX989EUA+
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX989 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 300 ns |
| Quiescent Current | 24μA |
| Turn On Delay Time | 300 ns |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
MAX989EUA+ Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.As a result, it is designed with Tube package.There are8 terminals on the comparator.Electronic comparator is a part of Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.As a result, it contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search MAX989 for more options.The comparator presents a quiescent current of 24μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 20μA .If the current supply exceeds 20μA , the comparator could malfunction.
MAX989EUA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX989EUA+ Applications
There are a lot of Maxim Integrated MAX989EUA+ linear comparators applications.
- Current and voltage sensing
- Battery-Powered Electronics
- Notebooks and PDAs
- Window Comparators
- Alarm and Monitoring Circuits
- Limit Comparators
- Battery management and protection
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
- Automotive
