MAX990ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX990 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX990ESA+T Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.This chip is designed with the Tape & Reel (TR) package.There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.The board includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.8 pins are available on the comparator.You can find more pin-to-pin solutions by searching MAX990 .There is a quiescent current of 24μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 40μA when using the device.The compartator could be damaged if the current supply exceeds 40μA .
MAX990ESA+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX990ESA+T Applications
There are a lot of Maxim Integrated MAX990ESA+T linear comparators applications.
- Infotainment & cluster
- Consumer Medical Electronics
- Window Comparators
- Window Comparators
- RC Timers
- Power management
- High-Speed Sampling Circuits
- Current and voltage sensing
- Building automation
- Automotive
