Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
362mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX990 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
2 |
Nominal Supply Current |
40μA |
Max Supply Current |
40μA |
Propagation Delay |
450 ns |
Quiescent Current |
24μA |
Response Time |
300 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V ±1.25V~2.75V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.01μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
24μA |
Voltage - Input Offset (Max) |
5mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
±3mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX990EUA+T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail, TTL .This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .This element consists of 2 elements in total.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 8 .Alternatively, you may search for MAX990 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 24μA .This component has a Surface Mount mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 40μA .An excess of current supply over 40μA could result in malfunction of the comparator.
MAX990EUA+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX990EUA+T Applications
There are a lot of Maxim Integrated MAX990EUA+T linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Wearable Devices
- General Purpose Low Voltage Applications
- Body Control Modules
- Mobile Phones
- Simple Analog-to-Digital Converters (ADCs)
- Automatic Test Equipment
- Factory automation & control
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors