MAX9913EUB+

2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00001μA 1.8V~5.5V MAX9913 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX9913EUB+
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 659
Description: 2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00001μA 1.8V~5.5V MAX9913 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1998
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifiers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	MAX9913
Pin Count	10
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	7μA
Nominal Supply Current	7μA
Output Current	15mA
Slew Rate	0.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	200μV
Bandwidth	200 kHz
Unity Gain BW-Nom	200 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Power	NO
Height	950μm
Length	3.05mm
Width	3.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX9913EUB+ Overview

There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 10. In total, there are 10 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 1.8V. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. An 10-pin op amp ic is included in the package. The input offset voltage is 200μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 7μA . There should be no change in the voltage gain at 120dB. There are a total of 2 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.