MAX9913EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9913 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 7μA |
| Nominal Supply Current | 7μA |
| Output Current | 15mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9913EUB+T Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 10. The total number of pins on linear amplifier is 10. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifiers-type of devices. An 10-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. This op amp can operate from a supply current at 7μA. It is recommended to keep the voltage gain at 120dB at all times. The buffer amp consists of 2 circuits in total. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
MAX9913EUB+T Features
10 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
MAX9913EUB+T Applications
There are a lot of Maxim Integrated MAX9913EUB+T Instrumentational OP Amps applications.
- Navigation
- RF cable systems
- Image computer boards
- ECG equipment
- Automotive sensors
- Precision measurement
- Biopotential
- Multiplication circuits
- Switching amplifier
- Medical instruments
