MAX9917EUB+

2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00003μA 1.8V~5.5V MAX9917 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX9917EUB+
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 726
Description: 2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00003μA 1.8V~5.5V MAX9917 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	MAX9917
Pin Count	10
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	40μA
Nominal Supply Current	40μA
Output Current	15mA
Slew Rate	0.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	200μV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00003μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Power	NO
Height	950μm
Length	3.05mm
Width	3.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX9917EUB+ Overview

A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 10 terminations over the past year. Linear amplifier has a total of 10 pins. The linear amplifier should be run at 1.8V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 10 pins are included on the operational amplifiers. There is an input offset voltage of 200μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 40μA volt supply current is needed for this linear amplifier to operate. 120dB should remain the voltage gain. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.