MAX991EKA+T
| Parameters | |
|---|---|
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX991 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 160μA |
| Max Supply Current | 160μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
MAX991EKA+T Overview
To facilitate transportation, it comes packaged in SOT-23-8 .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The part will be shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparators family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Surface Mount universial mout for easy adapting.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search MAX991 for more pin-to-pin solutions.In this comparator, the quiescent current is 96μA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 160μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 160μA .You are allowed to input a maximum current of 1pA into the device.
MAX991EKA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX991EKA+T Applications
There are a lot of Maxim Integrated MAX991EKA+T linear comparators applications.
- Infotainment & cluster
- Industrial
- Zero-Crossing Detectors
- Self-diagnostics
- Window Comparators
- Security Detection Systems
- Window Comparators
- Mobile Phones and Tablets
- Hand-Held Electronics
- Zero-Crossing Detectors
