MAX991ESA+T
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | MAX991 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 160μA |
| Max Supply Current | 160μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX991ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparators .In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The total number of elements is 2 .As a result, it contains 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .8 pins are present on the comparator.You can find more pin-to-pin solutions by searching MAX991 .As a result, this comparator displays a quiescent current of 96μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 160μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 160μA .Input current to the device cannot exceed 1pA .
MAX991ESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX991ESA+T Applications
There are a lot of Maxim Integrated MAX991ESA+T linear comparators applications.
- Power management
- General-Purpose Portable Devices
- Metering Systems
- Threshold Detectors
- Ultra-Low Power Systems
- Infotainment and Clusters
- General Purpose Low Voltage Applications
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
