MAX9923TEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 362mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9923 |
| Pin Count | 10 |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 780μA |
| Nominal Supply Current | 700μA |
| Max Supply Current | 700μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.85V~5.5V |
| Input Offset Voltage (Vos) | 200nV |
| Bandwidth | 50 kHz |
| Gain Bandwidth Product | 50 kHz |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.2μV |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX9923TEUB+ Overview
A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Op amps are Current Sense types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 10 terminations this year. The total number of pins on linear amplifier is 10. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 10 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 200nV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. An 780μA volt supply current is needed for this linear amplifier to operate. There are 1 circuits on op amps.
MAX9923TEUB+ Features
10 Pins
supply voltage of 3.3V
MAX9923TEUB+ Applications
There are a lot of Maxim Integrated MAX9923TEUB+ Instrumentational OP Amps applications.
- Semiconductor detectors
- Tablets
- Computer workstations
- Comparator
- Signal operation
- earphone
- Test equipment
- Radar
- Automotive sensors
- Active probe
