MAX992EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX992 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 160μA |
| Max Supply Current | 160μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX992EKA+T Overview
A convenient transport package is provided in SOT-23-8 .Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .This package has been designed with Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.The device is equipped with 8 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.If you require more pin-to-pin solutions, search MAX992 for more options.There is a quiescent current of 96μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 160μA .The compartator could be damaged if the current supply exceeds 160μA .A maximum current of 1pA can be supplied to the device.
MAX992EKA+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX992EKA+T Applications
There are a lot of Maxim Integrated MAX992EKA+T linear comparators applications.
- Motor drives
- Self-diagnostics
- Zero-Crossing Detectors
- Wireless Base Stations
- Wearable Devices
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- Power Supervision
- Portable and Battery-Powered Systems
- Laptop Computers
