MAX9939AUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9939 |
| Pin Count | 10 |
| Output Type | Differential |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 3.4mA |
| Nominal Supply Current | 3.4mA |
| Output Current | 70mA |
| Slew Rate | 9V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.9V~5.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 2.15MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Frequency | 5MHz |
| Input Voltage Noise Density | 54nV/sqrt Hz |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9939AUB+ Overview
The linear amplifier is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. Op amps are Programmable Gain types of amplifier on the chip. Linear amplifier is delivered in a Tube case. The number of terminations approaches 10. Buffer amplifier has a total of 10 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 10-pin op amp ic is included in the package. The input offset voltage is 1.5mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou can run this op amp ic on 3.4mA . There are 2 circuits on op amps. There are 1 channels on the operational amplifiers. This op amp ic outputs Differential signals, which is one of the many benefits it has.
MAX9939AUB+ Features
10 Pins
supply voltage of 5V
Output Type: Differential
MAX9939AUB+ Applications
There are a lot of Maxim Integrated MAX9939AUB+ Instrumentational OP Amps applications.
- Vehicle electronics
- Medical imaging
- Logarithmic operation circuits
- Tablets
- Non-polarized electrodes
- Weighing systems
- Video data acquisition
- Video computer boards
- Signal transformation
- Strain gauges
