MAX993ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparators |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX993 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX993ESD+T Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has14 terminals.The electrical component here belongs to the Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 4 elements in total.There are 14 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.Alternatively, you may search for MAX993 to find more pin-to-pin solutions for your specific needs.There is 24μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.In order to operate the device, +-1.5/+-2.5/3/5V power supplies are sufficient.A maximum current of 1pA can be supplied to the device.
MAX993ESD+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX993ESD+T Applications
There are a lot of Maxim Integrated MAX993ESD+T linear comparators applications.
- Laptop Computers
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
- Infotainment and Clusters
- Wearable Devices
- Motor drives
- Battery-Powered Electronics
- Building automation
- Portable Battery Monitoring
- Automatic Test Equipment
