banner_page

MAX994ESD+

Surface Mount Tube 300 ns μs Linear Comparators 1pA pA 2012 80μA μA 5mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX994ESD+
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 188
  • Description: Surface Mount Tube 300 ns μs Linear Comparators 1pA pA 2012 80μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 667mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number MAX994
Pin Count 14
Output Type CMOS, Open-Drain, Rail-to-Rail, TTL
Number of Elements 4
Power Supplies +-1.5/+-2.5/3/5V
Nominal Supply Current 80μA
Max Supply Current 80μA
Propagation Delay 450 ns
Quiescent Current 24μA
Response Time 300 ns
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~5.5V ±1.25V~2.75V
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.01μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 6V
Input Bias Current 1pA
Current - Quiescent (Max) 24μA
Voltage - Input Offset (Max) 5mV @ 5.5V
Current - Input Bias (Max) 1pA @ 5.5V
Hysteresis ±3mV
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Height Seated (Max) 1.75mm
Length 8.65mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX994ESD+ Overview


In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.This device is designed in Tube case.There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .As a result, it contains 14 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator is equipped with 14 pins.Try search MAX994 to get more pin-to-pin solutions for your special needs.A quiescent current of 24μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 80μA .A current supply greater than 80μA may result in the comparator malfunctioning.In order to run the device, there are only +-1.5/+-2.5/3/5V power supplies required.

MAX994ESD+ Features


CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA

MAX994ESD+ Applications


There are a lot of Maxim Integrated MAX994ESD+ linear comparators applications.

  • Wide Range VCO; MOS Clock Timers
  • Battery management and protection
  • Mobile Communications
  • Battery-Powered Electronics
  • Self-diagnostics
  • General-Purpose Portable Devices
  • Pulse, Squarewave, and Time Delay Generators
  • Analog front end
  • Mobile Phones and Tablets
  • Wearable Devices

Write a review

Note: HTML is not translated!
    Bad           Good