MAX994ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparators |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX994 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 300 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX994ESD+T Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type CMOS, Open-Drain, Rail-to-Rail, TTL output on this device.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparators family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .There are a total of 4 elements in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .14 pins are available on the comparator.If you require more pin-to-pin solutions, search MAX994 for more options.The comparator displays a quiescent current of 24μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 80μA .The device can be powered by +-1.5/+-2.5/3/5V power supplies.
MAX994ESD+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX994ESD+T Applications
There are a lot of Maxim Integrated MAX994ESD+T linear comparators applications.
- Automotive
- Consumer Medical Electronics
- Limit Comparators
- High-Speed Differential Line Receiver
- Portable Battery Monitoring
- System control and monitoring
- Mobile Phones and Tablets
- Window Comparators, Multivibrators
- General-Purpose, Low-Voltage Applications
- Portable and Battery-Powered Systems
