MAX994EUD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX994 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 450 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX994EUD+ Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) for ease of transportation.This comparator is of the CMOS, Open-Drain, Rail-to-Rail, TTL output type.Electronic comparator is shipped by Tube .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator includes 14 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX994 .There is 24μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 80μA for normal use.If the current supply exceeds 80μA , the comparator might be damaged.This device requires +-1.5/+-2.5/3/5V power supplies to operate.Electronic comparator is possible to input a maximum of 1pA current into the device.
MAX994EUD+ Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX994EUD+ Applications
There are a lot of Maxim Integrated MAX994EUD+ linear comparators applications.
- Mobile Phones
- Point of load regulators
- Building automation
- Factory automation & control
- Industrial
- Consumer Medical Electronics
- Body Control Modules
- Appliances
- Hand-Held Electronics
- Battery-Powered Electronics
