Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
MATTE TIN |
Subcategory |
Comparators |
Max Power Dissipation |
667mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX994 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
4 |
Power Supplies |
+-1.5/+-2.5/3/5V |
Nominal Supply Current |
80μA |
Max Supply Current |
80μA |
Propagation Delay |
450 ns |
Quiescent Current |
24μA |
Response Time |
450 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V ±1.25V~2.75V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.01μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
24μA |
Voltage - Input Offset (Max) |
5mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
±3mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX994EUD+T Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .This chip is designed with the Tape & Reel (TR) package.You can find 14 terminals of the comparator.Other Comparators like the device play a important role in the industry.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 4 elements in it.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .14 pins are present on the comparator.You can search MAX994 if you are looking for more pin-to-pin solutions.There is a quiescent current of 24μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 80μA .If the current supply exceeds 80μA , the comparator could malfunction.A power supply of +-1.5/+-2.5/3/5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 1pA into the device.
MAX994EUD+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX994EUD+T Applications
There are a lot of Maxim Integrated MAX994EUD+T linear comparators applications.
- Battery-Powered Electronics
- Portable Battery Monitoring
- Lithium ion battery monitoring
- Laptop Computers
- Hand-Held Electronics
- Metering Systems
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Security Detection Systems
- High-Speed Differential Line Receiver