MAX995ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX995 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 320μA |
| Max Supply Current | 320μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX995ESD+ Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.This device is designed in Tube case.The comparator has 14 terminals.The electrical component in this case belongs to the Comparators family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.It's a typical General Purpose comparator.This element consists of 4 elements in total.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching MAX995 .In this comparator, the quiescent current is 96μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 320μA supply current.If the current supply exceeds 320μA , the comparator might be damaged.This device requires +-1.5/+-2.5/3/5V power supplies to operate.
MAX995ESD+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX995ESD+ Applications
There are a lot of Maxim Integrated MAX995ESD+ linear comparators applications.
- Power Supervision
- Set Top Boxes
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Limit Comparators
- RC Timers
- Body Control Modules
- Infotainment and Clusters
- Power management
- Industrial
