Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
727mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.7V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX995 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
4 |
Power Supplies |
+-1.5/+-2.5/3/5V |
Nominal Supply Current |
320μA |
Max Supply Current |
320μA |
Propagation Delay |
210 ns |
Quiescent Current |
96μA |
Response Time |
210 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V ±1.25V~2.75V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.01μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
96μA |
Voltage - Input Offset (Max) |
5mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
±2.5mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX995ESD+T Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparators families.With a 2.7V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 4 elements in total.Electronic comparator has 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX995 .There is a quiescent current of 96μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 320μA .The compartator could be damaged if the current supply exceeds 320μA .This device requires +-1.5/+-2.5/3/5V power supplies to operate.
MAX995ESD+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX995ESD+T Applications
There are a lot of Maxim Integrated MAX995ESD+T linear comparators applications.
- Window Comparators
- Point of load regulators
- Laptop Computers
- Automotive
- Metering Systems
- Zero-Crossing Detectors
- Self-diagnostics
- Notebooks and PDAs
- Power management
- Multivibrators and High-Voltage Digital Logic Gates