MAX995EUD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX995 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 320μA |
| Max Supply Current | 320μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX995EUD+ Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tube package.You can find 14 terminals of the comparator.Other Comparators like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are present on the comparator.Try search MAX995 to get more pin-to-pin solutions for your special needs.A quiescent current of 96μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 320μA .A current supply greater than 320μA may result in the comparator malfunctioning.In order to run the device, there are only +-1.5/+-2.5/3/5V power supplies required.You are allowed to input a maximum current of 1pA into the device.
MAX995EUD+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX995EUD+ Applications
There are a lot of Maxim Integrated MAX995EUD+ linear comparators applications.
- High-Speed Differential Line Receiver
- Wireless Base Stations
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Mobile Phones and Tablets
- Security Detection Systems
- Automatic Test Equipment
- Portable Battery Monitoring
- Self-diagnostics
- Power management
